Google Ads

Google Ads for HVAC Companies: Pricing the Off-Season Right

Updated November 2026
17 min read
By Muhammad Shahid
Cover illustration titled Google Ads for HVAC Companies, budget for the season, not the average, with a thermostat dial between a snowflake and a flame, a bar chart rising and falling like the seasons, and a ringing phone icon
HVAC demand is not flat, so an HVAC ad budget should not be flat either.
Muhammad Shahid, AI-Powered Digital Marketing Consultant
·AI-Powered Digital Marketing Consultant
Google Ads Certified
Meta Blueprint Certified
Google Analytics Certified
Updated November 2026
Quick Answer
An HVAC company should set its Google Ads budget from two numbers: the extra booked jobs its crews can handle in the busiest month, and the cost per booked job it can afford. That gives the peak budget. Every other month should get a share of it that matches search demand. In the Houston keyword data I pull for an HVAC account, November searches were about 25% of April's. A flat monthly budget runs out on hot days and wastes money on quiet ones. Use Google's own budget rules, not its seasonality tool, to handle the swing.

How much should an HVAC company spend on Google Ads, and when? Spend the most in the months people search the most, and set that peak from the jobs your technicians can actually take multiplied by what a booked job is worth paying for. Then scale every other month down in line with real search demand, and keep a small floor running all year for brand and emergency calls.

In short: an HVAC Google Ads budget is a seasonal plan, not one number. Peak budget equals target booked jobs times your allowed cost per booked job. Off-season months get a share of that peak based on your own city's search data. A flat monthly figure is the most common reason HVAC accounts look broken in summer and expensive in winter.

I run Google Ads for local service businesses, including an air conditioning company in Houston, Texas. When I rebuilt that account in April 2026, the first thing I pulled was twelve months of keyword demand for the city. The swing was bigger than the owner expected. April had 14,280 searches across 335 HVAC keyword groups. November had 3,620.

I read the pages that rank for this topic, from agencies and field-service software vendors. Nearly all of them cover keywords, landing pages and Local Services Ads well. Most give one budget range for the whole year. The few that mention seasons use one generic American calendar, as if Phoenix, Minneapolis and Houston have the same year. None ties the season to how Google's budget settings actually behave.

So this guide puts the season first. It covers what HVAC clicks and leads cost, how much demand really moves, the budget math I use, the Google settings that matter in a heat wave, how Local Services Ads changed in 2026, and the keywords, tracking and mistakes that decide whether the spend turns into booked jobs.

How much should an HVAC company spend on Google Ads?

Work it out from capacity and cost per booked job, not from a percentage of revenue. If your crews can take 40 extra jobs from ads in your busiest month and you can afford $120 to win each one, your peak budget is $4,800. Other months get less, in line with demand. Industry rules of 5% to 10% of revenue are a ceiling check, not a plan.

Percentage rules fail for a simple reason. They tell you how much you could spend, not how much the market will let you spend well. A $3 million company and a $600,000 company in the same city face the same searchers, the same clicks and the same cost per call. The difference is how many jobs each one can run.

The budget formula I use

  1. Count your peak capacity. How many extra booked jobs from ads can your technicians handle in the busiest month, without pushing out repeat and maintenance customers?
  2. Set your allowed cost per booked job. Start from average ticket and margin. A repair worth $350 cannot carry the same acquisition cost as a $9,000 system replacement.
  3. Multiply. Peak budget equals peak jobs times cost per booked job.
  4. Turn it into a daily figure. Divide the monthly budget by 30.4, because that is the multiple Google uses to cap monthly spend.
  5. Scale the other eleven months by each month's share of peak search demand, with a floor for brand and emergency terms.

A worked example with real demand data

Take the example above: $4,800 in the peak month, which works out to about $158 a day. Now apply the Houston demand pattern from the chart in the next section. September ran at 79% of April's searches, so it gets about $3,800. January ran at 32%, so about $1,530. November ran at 25%, so about $1,220.

Add the twelve months up and the yearly spend is about $32,900, or roughly $2,740 a month on average. That average is the trap. A flat $2,740 budget leaves April about $2,000 short when phones should be ringing, and spends more than double what November's demand can use. The figures here are an illustration of the method. Your own capacity, ticket size and city data will change every number.

What do HVAC clicks and leads cost on Google Ads?

The most reliable public benchmark is LocaliQ's 2026 data for the Home and Home Improvement category: an $8.33 average cost per click, a 6.47% click-through rate, an 8.05% conversion rate and a $90.92 average cost per lead. HVAC is not broken out on its own. Agency reports for HVAC alone range widely, and emergency terms cost far more than the average.

The LocaliQ search advertising benchmarks, last updated 1 June 2026, are the closest thing to an independent number. Treat them as a sanity check. Most HVAC cost figures you see online come from agencies and software vendors describing their own clients, and they contradict each other: I have seen home-service cost per lead claims from $18 to over $150 in the same month of research.

MetricFigureSource and how to read it
Average cost per click$8.33LocaliQ 2026, Home and Home Improvement category
Average click-through rate6.47%LocaliQ 2026, same category
Average conversion rate8.05%LocaliQ 2026, same category
Average cost per lead$90.92LocaliQ 2026, a lead, not a booked job
Top-of-page bid, “ac repair houston”$22.56 to $85.48Google Keyword Planner, Apr 2025 to Mar 2026
Top-of-page bid, “emergency air conditioning repair”$46.26 to $111.10Google Keyword Planner, same period

Why your city beats any national average

The Houston numbers show how far a local market sits from the category average. Across the 41 keyword groups in that dataset with a bid estimate, the median top-of-page range was $10.32 to $50.00. The money terms sit well above the $8.33 category average, because AC repair in a hot city is one of the most fought-over local searches there is.

That is why I tell owners to ignore national averages once they have their own data. After 60 to 90 days, your account shows your real pay-per-click costs, your click-through rate and your cost per call. Plan next season on those.

How much does HVAC search demand change by season?

A lot, and more than most budgets allow for. In twelve months of Google Keyword Planner data for Houston, searches across 335 HVAC keyword groups peaked at 14,280 in April 2025 and fell to 3,620 in November, about 25% of peak. September jumped back to 11,310 during a late heat spell. Your climate sets the shape of this curve.

I pulled this data with Google Keyword Planner when I rebuilt the Houston account, removing close variants that Google reports with identical numbers so nothing is counted twice. The chart below is the full year.

Bar chart titled HVAC search demand swings with the season, showing monthly Google searches across 335 HVAC keywords in Houston, Texas: April 14,280, May 12,320, June 10,400, July 9,470, August 8,900, September 11,310, October 6,230, November 3,620, December 5,920, January 4,550, February 4,530, March 6,230. Source: Google Keyword Planner, April 2025 to March 2026.
Houston HVAC search demand by month. Source: Google Keyword Planner, Houston TX, April 2025 to March 2026, close variants de-duplicated.

The terms that swing hardest

  • “24 hour ac repair houston” went from 1,300 searches in April 2025 to 30 in February 2026. Emergency intent nearly disappears when it is not hot.
  • “ac repair houston” ran 5,400 in April, 4,400 in September and 1,000 in November. Still worth running in winter, at a fraction of the budget.
  • “ac not blowing cold air” held between 70 and 480 a month. Symptom searches are steadier and cheaper, with a top-of-page range of $8.56 to $48.47.
  • Heating terms were only 21 of the 335 groups and peaked at about 13% of searches in December. In Houston, heating is a side business. In Chicago it would be the main one.

Your climate decides your season

Heating and cooling are the biggest energy jobs in an American home. The U.S. Energy Information Administration reports that more than half of a household's annual energy use, 52% in 2020, goes to just two jobs: space heating and air conditioning. Which of the two dominates depends on where you are, and so does your ad calendar.

  • Hot most of the year (Houston, Phoenix, Florida, Dubai): one long cooling season with a spring peak and often a second spike in September. Winter is a floor, not a shutdown.
  • Cold winters (the upper Midwest, the Northeast, Canada): heating and furnace repair carry the year, with a shorter summer AC peak. Budgets should rise in October, not April.
  • Two clear peaks (much of the Mid-Atlantic and middle states): summer cooling and winter heating, with real shoulder months in spring and autumn when budgets should shrink.

Do not take any calendar from a blog, including this one, as your own. Pull twelve months for your services and your city in Keyword Planner. It takes about twenty minutes, and it is the only seasonality data that matters for your budget.

How do you set a seasonal HVAC Google Ads budget?

Pull a year of demand for your city, price the peak month from capacity and cost per booked job, scale every other month by its share of peak demand, then keep a floor of brand, emergency and in-season terms running all year. Review it monthly, and move the budget ahead of the weather by a week or two rather than reacting after the phones go quiet.

Infographic titled Set a budget that follows the season, four steps using your own city's numbers: 01 Pull 12 months of demand in Keyword Planner for your city and services. 02 Price the peak month: target booked jobs times cost per booked job. 03 Scale every other month: budget equals peak budget times that month's share of peak demand. 04 Keep an off-season floor: brand, emergency and heating terms stay on. Takeaway: budget follows demand, not the yearly average.
The four-step seasonal budget method. Run it once a year, then adjust monthly.

Keep a floor, never a zero

Switching everything off in the quiet months feels like saving money. It usually costs more. Brand searches still come in, emergency breakdowns still happen, and a paused account restarts in spring with stale data while competitors who stayed on keep the calls. My usual winter floor is brand, repair and emergency terms only, sized to the month's share of peak demand.

Capacity is the real ceiling

The budget limit for a service business is not money. It is technicians. If your crews are booked out three days ahead in a heat wave, more ad spend just buys leads you cannot serve, and an unhappy caller who waited four days writes the review. I set the peak budget from capacity first and only raise it when the dispatch board shows open slots.

The same logic runs the other way in the shoulder months. When techs have open days, that is the time to run maintenance plans and replacement offers at a lower cost per click, because demand for emergency repair is gone but homeowners still plan ahead.

Comparison infographic titled Flat budget vs seasonal budget. Flat monthly budget: same spend in April and November, capped out when phones should ring, bids up thin traffic in the quiet months, lead cost looks random. Seasonal budget: spend rises with search demand, full coverage on peak heat days, lean floor on brand and emergency, lead cost you can plan around. Takeaway: same yearly spend, very different year.
Same yearly spend, two very different results. The seasonal plan puts the money where the searches are.

Which Google Ads settings matter when the weather turns?

Three settings do the work: the average daily budget, which Google lets spend up to twice on a busy day; the monthly cap of 30.4 times that daily figure; and the ad schedule. Seasonality adjustments in Smart Bidding help for a few days of extreme weather, but Google says they are built for 1 to 7 day events, not whole seasons.

The 2x daily and 30.4x monthly rules

Google's help page on spending limits is clear: “For most campaigns, the daily spending limit is your average daily budget multiplied by 2.” Over a month, you will not be charged more than “30.4 times your average daily budget.” If Google serves more than that, it says it will “cover the difference.”

For HVAC this is useful. On the first 100-degree afternoon, a $158 daily budget can spend up to $316 and catch the spike, then spend less on a mild day. The month still evens out. What it cannot do is turn a winter-sized budget into a summer-sized one. That needs you to change the budget.

Seasonality adjustments are for heat waves, not summers

Smart Bidding has a tool called seasonality adjustments that tells the bidding system to expect a change in conversion rates. Many HVAC owners assume it handles summer. It does not. Google's seasonality adjustments help page says:

“Seasonality adjustments are ideal for short events of 1-7 days.”

The same page warns they “may not work as well if you use them for extended periods, such as more than 14 days at a time.” I use them only when a forecast shows a heat wave or a hard freeze a few days out. For the season itself, I change the budget and let the bidding learn. If you are deciding how much to trust automated bidding, my comparison of Smart Bidding vs manual bidding goes deeper.

Ad schedules and capacity

  • Run 24/7 only if someone answers 24/7. An emergency ad that rings to voicemail at 11 PM wastes the click and the customer.
  • Cut or lower bids in hours you cannot book. If dispatch closes at 6 PM, a lead at 9 PM waits until morning, and many will have called the next company.
  • Check performance by hour after 60 days. Call rates by hour differ from market to market, so let your own account data set the schedule, not a template.

Should HVAC companies run Local Services Ads, Search ads, or both?

Most should run both. Local Services Ads charge per lead and show the Google Verified badge at the top of the page, which wins trust fast. Search ads charge per click but give full control over keywords, landing pages and schedules. Since August 2026, US HVAC Local Services Ads are moving into Google Ads as Performance Max campaigns with pay-per-lead goals.

On pricing, Google's Local Services Ads lead help page says you are “charged for each valid lead,” and lead prices vary by location, job type and bidding mode. Its bidding help page recommends “a minimum budget of 10 leads per week for optimal results.” You can flag a poor lead through the feedback survey for that lead.

FactorLocal Services AdsGoogle Search ads
You pay forEach valid leadEach click
Trust signalGoogle Verified badge, reviewsYour ad copy, assets and landing page
Keyword controlJob types onlyFull, including negatives
Landing pageNone, the call or message goes straight to youYours, which you can test and improve
Seasonal controlBudget and service areaBudget, schedule, keywords, bids, ad copy
Budget rules from 2026Daily average budget, 30.4x monthly capDaily average budget, 30.4x monthly cap

What the 2026 move into Performance Max changes

Google's transition help page lists HVAC among the US home-service categories in the first phase, starting August 2026. Weekly budgets become daily averages, with monthly spend “capped at the daily average multiplied by 30.4,” and manual maximum cost per lead bidding is no longer supported. You still pay per lead, and the ads still show only on Search and Maps.

The practical effect for seasonal HVAC budgets: Local Services Ads now follow the same daily budget rules as your Search campaigns, so plan both together in one calendar. I cover the wider program in my Local Services Ads guide and the campaign type in Performance Max for local business.

Which keywords should HVAC companies bid on, and which should they block?

Bid on service plus location searches, emergency and 24-hour repair, installation and replacement, and symptom searches your landing pages answer. Block job seekers, training, DIY, parts, manuals and equipment brand support terms from day one. A clean negative keyword list does more for cost per call in the first month than any bid change.

Group keywords by job value, not by word

  • Emergency repair: 24-hour AC repair, emergency furnace repair, AC not working. Highest cost, highest urgency, needs someone answering the phone.
  • Standard repair: AC repair plus your city, heat pump repair, furnace repair. The core of most accounts.
  • Replacement and installation: new AC unit cost, HVAC replacement. Lower volume, much higher ticket, longer decision.
  • Maintenance: AC tune-up, furnace maintenance. Cheap clicks, best in shoulder months, feeds maintenance plans.
  • Symptom searches: AC not blowing cold air, furnace making noise. Steady volume, cheaper clicks, needs a page that answers the problem.

Negatives to add before launch

Start with jobs, careers, salary, training, school, certification, DIY, how to fix, parts, filters, manual, used, and the brand names of equipment makers when people search for their support lines. In the Houston account I also added generic “hvac companies” research searches as negatives, because they brought list-shoppers, not homeowners with a problem. Check the search terms report weekly for the first two months.

How should an HVAC Google Ads account be structured and tracked?

Split campaigns by job type so each gets its own budget and season: emergency repair, standard repair, replacement, and maintenance. Send each to a matching landing page with the phone number at the top and a short form. Track calls and forms as conversions, then import booked jobs from your field-service software so bidding learns from revenue, not clicks.

Landing pages that turn clicks into calls

When I rebuilt the Houston account, the emergency landing page form went from a long quote request to three fields: name, phone and what is happening. The button changed to “Get a Tech on the Way”. The page is about one job, not the whole company. That is the pattern I use across every Google Ads account I manage.

One policy trap I see often: phone numbers typed into responsive search ad headlines. Google flags them, and the ad can be disapproved. The number belongs in a call asset, not in headline text. Fixing this was on the first-week checklist for that account.

Location targeting and ad copy

Target the zip codes or radius your trucks actually serve, and set the location option to people in or regularly in your area, not people merely interested in it. Otherwise a searcher three states away researching a move can click your emergency ad. Draw the map around drive time, because a 90-minute trip to a $150 repair loses money even when the lead is real.

  • Headlines that match the job: the service, the city and the promise you can keep, such as same-day repair if your schedule allows it.
  • Call assets on every campaign, set to your business hours, so mobile searchers can ring you straight from the ad.
  • Location and review assets that tie the ad to your Google Business Profile and its rating.
  • Seasonal copy swaps: AC wording from spring to early autumn, heating wording when the first cold front arrives.

Tracking that tells the truth

A form fill is not a job. Most HVAC leads come by phone, so call tracking with recordings is the minimum. Better still, connect your field-service software, such as ServiceTitan, so booked and completed jobs go back into Google Ads as offline conversions. Then Smart Bidding can aim for a target cost per action that reflects real revenue. My roundup of call tracking software for Google Ads compares the options.

How do you know if HVAC Google Ads are profitable?

Measure cost per booked job and revenue per job, not cost per click or cost per lead. If a booked repair averages $450 in revenue and your cost per booked job is $120, the ads pay. Use the category benchmark only as a start: at LocaliQ's $90.92 cost per lead and, say, half of leads booking, a booked job costs about $182.

That booking rate is an assumption for the example, not a benchmark. Booking rates vary widely between HVAC companies, and the difference usually comes down to who answers the phone and how fast. In my experience, the cheapest way to lower cost per booked job is often in the office, not in the ad account.

  1. Pull 90 days of leads from Google Ads and your call tracking.
  2. Match each lead to an outcome in your field-service software: booked, quoted, lost, spam.
  3. Divide ad spend by booked jobs to get cost per booked job, by campaign.
  4. Compare it with average revenue and margin per job type, including maintenance plan sign-ups.
  5. Move budget from the campaign with the worst cost per booked job to the best, within each season.

Done quarterly, this turns search engine marketing from a cost line into a number you can plan around. If you want a wider view of the system around the ads, my Google Ads guide for local service businesses covers the basics.

What are the most common HVAC Google Ads mistakes?

The costly ones are a flat budget all year, broad keywords without negatives, sending ads to the homepage, counting form fills instead of booked jobs, running emergency ads when nobody answers, and expecting seasonality adjustments to handle summer. Each one is a system gap, not a failure of the person running the account. Most are fixed in the first two weeks.

  • One budget for twelve months. Starved in peak, wasteful in winter. Use the seasonal method above.
  • Broad match with no negatives. Jobs, DIY and parts searches eat the budget before a homeowner sees the ad.
  • Homepage as the landing page. A searcher with no cool air wants one button, not a company history.
  • Optimizing to form fills. Bidding learns to find people who fill forms, not people who book.
  • 24/7 ads, 9-to-5 phones. After-hours clicks with no answer are the most expensive leads you will ever buy.
  • No organic base. Ads stop when the budget stops. Pair them with search engine optimization and a strong Google Business Profile, as in my local SEO guide for contractors.

The bottom line on Google Ads for HVAC companies

Google Ads works well for HVAC because people search when something breaks. The money is lost in the calendar. Set your peak budget from technician capacity and cost per booked job, scale the rest of the year by your own city's search data, keep a floor running in winter, and use Google's 2x daily rule and ad schedules to handle the weather.

If you do one thing this week, pull twelve months of HVAC keyword demand for your city in Keyword Planner and put it next to last year's ad spend by month. The gap between those two lines is usually where your wasted budget and your missed calls both live.

If you want a second pair of eyes on it, book a free call. We will talk through your spend by month against the demand in your market, and I will tell you where I would look first before next season.

Frequently asked questions about Google Ads for HVAC companies

The questions HVAC owners ask me most about budgets, costs and seasons.

Frequently Asked Questions

How much should an HVAC company spend on Google Ads per month?

Start from the jobs you can actually run, not a percentage. Multiply the extra booked jobs your crews can handle in your busiest month by the cost per booked job you can afford. That is your peak budget. Every other month gets a share of it in line with search demand, which in one Houston market fell to about 25% of peak in November.

What does an HVAC lead cost on Google Ads?

There is no single trustworthy HVAC number. LocaliQ's 2026 benchmarks put the Home and Home Improvement category at an $8.33 average click and a $90.92 average cost per lead. Agency reports for HVAC range from about $35 to over $150 depending on service, market and season. Your own account after 60 to 90 days is the only number to plan with.

Should HVAC companies run Google Ads in the off-season?

Yes, but smaller. Keep brand searches, emergency repair and the heating or cooling terms that still get searched in your climate. Cut broad installation and maintenance terms that only work in peak weeks. Turning everything off means a cold restart in spring, and competitors who stayed on hold the calls you gave up.

Are Local Services Ads better than Google Search ads for HVAC?

They do different jobs. Local Services Ads charge per lead, sit at the top of the page and carry the Google Verified badge, but you control little beyond budget and service areas. Search ads cost per click and give you full control of keywords, landing pages and schedules. Most HVAC companies I work with run both.

Do Google Ads seasonality adjustments work for HVAC summer budgets?

Not for a whole season. Google says seasonality adjustments are ideal for short events of 1 to 7 days and may not work as well past 14 days. Use them for a forecast heat wave or cold snap. For a summer that lasts months, change the campaign budget itself and let Smart Bidding learn the new pattern.

Why did my HVAC Google Ads spend more than my daily budget?

That is normal. Google can spend up to twice your average daily budget on a busy day, but over a month it will not charge more than 30.4 times the daily average. On a hot afternoon when calls spike, that flexibility helps. If your crews cannot take more jobs that day, use an ad schedule rather than a lower budget.

What keywords should an HVAC company bid on?

Start with service plus location terms such as AC repair plus your city, 24-hour and emergency repair, furnace or heat pump repair, and installation or replacement. Add symptom searches such as AC not blowing cold air if your landing page answers them. Block jobs, training, DIY, parts and brand names of equipment makers from day one.

How long do HVAC Google Ads take to work?

Calls can start the first week once ads are approved. Reliable cost numbers take longer. I give a new account 60 to 90 days to collect enough conversions for Smart Bidding to settle and for the search terms report to show where money leaks. Judge it on booked jobs over a full quarter, not a single week.

About the author

Muhammad Shahid, AI-Powered Digital Marketing Consultant

Independent AI-Powered Digital Marketing Consultant

Works with businesses worldwide·5+ years in SEO, Google Ads & AI search

I am an independent consultant focused on Local SEO, Google and Meta Ads, web design, and answer-engine and generative-engine optimisation (AEO and GEO). I run every one of these systems on my own business before I recommend it, and every audit, campaign, and report is delivered by me personally, not an account manager.

Certified:Google Ads · Meta Blueprint · Google Analytics 4

Selected results: +427% organic traffic in 30 days for a US HVAC company, and 3,770 Google Business Profile calls in a year for an Australian transport client. See the full portfolio.

Reviewed and updated May 2026